Intelligent blind control / MTSWIS-101-WL
Radio Switch Shutter Plus
Some great advantages for you:
- Used to control the motor of blinds, shutters, awnings, etc.
- Z-Wave compatible
- Very suitable for retrofits
- Controllable with myTEM touch add-on
- Position calibration
- Operation also via local buttons
SKU: 805708
Categories: Light, Room Climate, Software, Timer, Z-Wave
The Radio Switch Shutter Plus is used to control a blind with and without moving slats, shutters, awnings etc.
The Radio Switch Shutter Plus is controllable via the Radio Server, via the switches/buttons connected to the inputs or via the optionally connectable Touch Add-On. Thus, shutters and blinds can be controlled both via Z-Wave or as before via conventional wall switches.
When used together with the myTEM Touch Add-On, the temperature and humidity sensor integrated in the Touch Add-On, as well as the lighting cannot be used.
Applications:
- Switching electrically operated blinds or similar shading devices.
- Operating voltage: 110 – 230 V AC ± 10%, 50 – 60 Hz or 24 V DC
- Inputs digital: 2x Digital In, (I1 – I2), 230 V AC or 24 V DC (according to operating voltage)
- Outputs: 2x Digital Out (relay) 250V AC61 6A cos(φ) = 1, 30V DC 6A
- Interfaces: Z-Wave wireless standard
- Mounting: in flush-mounted or cavity wall box (wall, ceiling) ≥ Ø 60 mm, depth ≥ 60 mm
- Switching off: end position detection of the blind by calibrating the position
- Control: Z-Wave, two local buttons, 5 buttons when Touch Add-On Glossy is connected.
- Operating temperature range: 0° C to +40° C, non-condensing
- Dimensions (WxHxD): 44 × 41 × 19 mm